GBPCHF 1D TRIANGLE BREAKOUTTriangles are repeatable trading chart patterns.
Triangles are consolidation chart patterns that can breakout either direction.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of the average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
ATR
AUDCHF 1D MA-X MOVING AVERAGE CROSS
Tim's MA-X Strategy.
This is a Moving Average Crossover or MA-X Trading Strategy setup.
MA-X strategy consists of the 100 period simple moving average (SMA) in red,
and the 20 period exponential moving average in blue.
If the 20 ema is above the 100 sma then we only take buys or longs.
If the 20 ema is below the 100 sma the we only take selss or shorts.
*In this case price is above the 100 sma so we will only take buys or longs.
*This Pair has been in a nice uptrend foe some time.
*It's now pulled back below the 20 ema and consolidating below the 20.
*We are going to look for a close above the 20 ema to go long.
*This trade plan we buy a daily candle close above the 20 ema.
On the breaking candle to enter a full-sized position we want to the volume bar reach up to the volume average.
If it doesn't reach the average but does reach 75% of the average open a ½ size position to reduce risk.
You can calculate the percentage by dividing the first volume average by the second volume average.
You should at least get 75%, if you don't then stand aside on the trade.
The stop loss will be 1.5 x ATR.
The first target will be 1 x ATR.
So the way that works is you get your candle close above the 20 ema that's your entry point.
At that time you look at the ATR of that candle.
You multiply that by 1.5 to get your SL.
You measure that distance behind the entry and that will be your SL.
Then you measure 1 ATR above the entry and that will be your first target.
If after entering the trade the candle closes back below the 20 ema, tke the loss right then.
Do not wait for price to hit the SL.
Our intention is that a breakout above the 20 ema should be explosive and hit our target fairly quickly.
If the momentum goes away we want to shut the trade down without taking a full stop if possible.
When price hits our first target, close half the position for profit and set the SL to break even on the remainder.
Follow stops as price moves in our direction until the market takes us out.
These two rules are the very definition of cutting your losses and letting your winners run.
Typically does this by using two positions.
The first position has a stop loss and a take profit.
That position will close automatically when the first target is hit.
The second position will only have a stop loss and not take profit.
This is the position that will be allowed to run.
When the first target is hit we have to manually move our stop up to break even on the second position.
Risk only two percent of your trading account of each trade.
Each position will then only be 1%.
USDMXN 1D TRIANGLE BREAKOUTTriangles are repeatable trading chart patterns.
Triangles are consolidation chart patterns that can breakout either direction.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
EURNZD 1D BULL FLAG LONG TRADEBull Flags are a Range pattern and are a repeatable trading chart patterns.
Bull Flag chart patterns will have a directional bias depending on the previous incoming trend.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
MacDonald's 1D Bull Flag Short TradeBull Flag is a Range pattern and they are a repeatable trading chart pattern.
Bull Flag Range chart pattern will have a directional bias depending on the previous incoming trend.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of the average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
PALLADIUM 1D DESCENDING TRIANGLEDescending Triangles are repeatable trading chart patterns.
Descending chart patterns will have a directional bias depending on the previous incoming trend.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of the average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
EURUSD TD outlook for 4 hrsThat is how we see it, pretty simple. One can use ATR stop for stops (pretty accurate tool), which is based on average true range (the input can be changed). The broken demand line is more important than descending one (trendline value is measure by the number of consequent highs or lows above the extremums).
I saw some of you draw a descending triangle but by TD rules we can not make a triangle, because there is no relevant TD point below the top TD P5.
We have 2 horizontal levels below on the way which price has to get through (with struggle of course) and to retest those after the breaks (!).
DM projection sends price into the "free fall zone". We will see.
Good luck!
THIS IS NO FINANCIAL ADVISE. You are solely responsible for you trading decisions:)
Top Positive Correlation 4 hrs
1 EURUSD - NZDUSD 83.2%
2 EURUSD - AUDUSD 80.5%
3 EURUSD - GBPUSD 79.7%
4 EURUSD - AUDJPY 78.2%
5 EURUSD - US2000 75.8%
6 EURUSD - GER30 74.9%
7 EURUSD - SPA35 73.7%
8 EURUSD - AUDCHF 71.3%
9 EURUSD - FRA40 70.7%
10 EURUSD - AUDSGD 69.3%
GOLD ETF 1D ASCENDING TRIANGLE LONG TRADEAscending Triangle are repeatable trading chart patterns.
Ascending Triangle chart patterns will have a directional bias depending on the previous incoming trend.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
False breakout on EUR/USD? Hi traders! I'm new here and learning about different strategies. Now applying a false breakout strategy. Spotted a swing low and the candle that broke that price was between 1 and 2 ATR. Placed entry with a stop loss at 1 ATR from the lowest price point and take profit at R:R ratio of 1:2. Do I need to take more into consideration when applying this strategy? Other good indicators to combine? Fundamental analysis? Larger timeframes? #lookingforfeedback.
NQ1! 1D BEAR FLAG SHORT TRADEBear Flags are a form of a Range Pattern and Bear Flags are repeatable trading chart patterns.
Bear Flag chart patterns will have a directional bias depending on the previous incoming trend (Short trade).
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of the average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
ETHUSD 1D TRIANGLE BREAKOUTSTriangles are repeatable trading chart patterns.
Triangles are consolidation chart patterns that can breakout either direction.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart ).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility ) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the volume settings on the chart – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
EURJPY 4H TRIANGLE BREAKOUT TRADESTriangles are repeatable trading chart patterns.
Triangles are consolidation chart patterns that can breakout either direction.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart ).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility ) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the volume settings on the chart – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
Bitcoin: I would consider a hedging position Hit a LIKE to Support my ideas and leave a comment to let me know what you think!
The second Fibo shows that we are exactly in the middle of an important range between level 0.786 and 0.5. Level 0.786 matches with an important support/resistance level represented by the light blue thick horizontal line.
I see support at 8500$ level, where Kumo becomes horizontal and the previous (and bigger) Fibo has its 0.5 Level.
What I consider more probable to happen is the following: Bitcoin going up towards the upper limit of the Kumo (area 9240$): breaking it, may prepare a run towards 9416$, otherwise we can assist to a bounce back: at first at the base line of Kumo and then we may aim to the support levels of second Fibo, at 8500$.
Keep in mind that 8500$ is a strong resistance, so what happened the past days may be just the first attempt to break it downwards.
On the 4H I see some signs of possible retracement with a bearish RSI and the price at the upper Kumo level.
Volatility is knocking on the support, and if it will resist for a couple of days we will see an increase in volatility in within the next week.
What am I going to do?
If Bitcoin breaks 9250$ area consistently (with volumes and candle body) I will be long
If Bitcoin breaks 8900$ area consistently (with volumes and candle body) I will be short
EURCHF 1D MA-X CROSSOVER STRATEGYTim's MA-X Strategy.
This is a Moving Average Crossover or MA-X Trading Strategy setup.
MA-X strategy consists of the 100 period simple moving average (SMA) in red,
and the 20 period exponential moving average in blue.
If the 20 ema is above the 100 sma then we only take buys or longs.
If the 20 ema is below the 100 sma the we only take selss or shorts.
*In this case price is above the 100 sma so we will only take buys or longs.
*This Pair has been in a nice uptrend foe some time.
*It's now pulled back below the 20 ema and consolidating below the 20.
*We are going to look for a close above the 20 ema to go long.
*This trade plan we buy a daily candle close above the 20 ema.
On the breaking candle to enter a full-sized position we want to the volume bar reach up to the volume average.
If it doesn't reach the average but does reach 75% of the average open a ½ size position to reduce risk.
You can calculate the percentage by dividing the first volume average by the second volume average.
You should at least get 75%, if you don't then stand aside on the trade.
The stop loss will be 1.5 x ATR.
The first target will be 1 x ATR.
So the way that works is you get your candle close above the 20 ema that's your entry point.
At that time you look at the ATR of that candle.
You multiply that by 1.5 to get your SL.
You measure that distance behind the entry and that will be your SL.
Then you measure 1 ATR above the entry and that will be your first target.
If after entering the trade the candle closes back below the 20 ema, tke the loss right then.
Do not wait for price to hit the SL.
Our intention is that a breakout above the 20 ema should be explosive and hit our target fairly quickly.
If the momentum goes away we want to shut the trade down without taking a full stop if possible.
When price hits our first target, close half the position for profit and set the SL to break even on the remainder.
Follow stops as price moves in our direction until the market takes us out.
These two rules are the very definition of cuttoing your losses and letting your winners run.
Typically does this by using two positions.
The first position has a stop loss and a take profit.
That position will close automatically when the first target is hit.
The second position will only have a stop loss and not take profit.
This is the position that will be allowed to run.
When the first target is hit we have to manually move our stop up to break even on the second position.
Risk only two percent of your trading account of each trade.
Each position will then only be 1%.
CADCHF 1W RANGE TRADESRanges are repeatable trading chart patterns.
Ranges are consolidation chart patterns that can breakout either direction.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
YELP 1W DESCENDING TRIANGLE SHORT TRADEDescending Triangles are repeatable trading chart patterns.
Descending chart patterns will have a directional bias depending on the previous incoming trend.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.